TRANS FAILSAFE PROG is a default setting for a BMW auto transmission when the Engine Control Unit (ECU) detects a transmission problem. It could be a serious problem or something as simple as a discharged battery. TRANS FAILSAFE PROG is a BMW function that only affects vehicles with automatic transmissions. The steering angle sensor is mounted on the steering shaft and is located at either the bottom of the steering column or behind the airbag in the steering wheel. The later referred to as the switch cluster. After replacing the steering-angle sensor, it must first be coded and then calibrated. Disconnect The Battery. You will need to disconnect the battery. You can turn off your car, remove the negative terminal from underneath it, and attach a wire to it. Then attach another wire to the positive terminal and attach the two wires. This will allow you to reset your airbag light without having to reset any other computer systems on srsDrive. passenger restraint system malfunction, which is faulty seat occupancy mat/pad sensor, with the airbag or (and) seat belt light on the dashboard or iDrive, can be easily fixed with seat emulator/bypass, specially created for this problem. This emulator compatible with any BMW model and can be found on. Unlock the hidden menu. Press and hold the reset button until item 01 is displayed. Then, toggle the reset button multiple times until you reach Unlock meu. It will be either menu 4 or 19. You will see Lock ONā€”code 00. Use the reset button to change the CODE to the total of the last five digits of your VIN. The Hidden Menu Is unlocked. The sensors are worn out, they need to be replaced togheter with the brake pads. If you only replaced the pads, you will not be able to reset the warning. If the sensor made contact with the rotor, yes you need to replace. But if not, then you can reuse them. It is connected to the brake pad. Appreciate 0. How To: BMW 535i Battery Replacement & Register w/ BimmerLink Veepeak Adapter: There are many reasons why your BMW battery discharges while stopped. Common discharge causes include faulty IBS (Intelligent Battery Sensors) and old batteries. It may not hold a charge, and an electronic device connected to the 12-volt outlet may be draining power from the battery. Problems with the junction box, DME, DDE, CA module, and OBD2 KDGx55C.

bmw f10 replace battery warning reset